Yeah! It is my very first DIY -POST. The harness belt. I really love this body jewellery so, I thought to make one.
What you need:
- needle and thread
- two elastic straps ( instead of elastic straps you can also use your old belt or leather fabric)
- old belt
- metallic ring ( I got it from my old bag, which I cut it out)
- punch pliers
- two studds
What to do:
Take one of the elastic strap and the metallic ring. Try to conform it on your body. There you can be creative and create your
own harness belt. It is just a simple example of my harness belt. If you find the perfect fit, then fix it with some pins. After doing
this, take the second elastic strap and do the same. Subsequent, you sew it together with the metallic ring. Afterwards you take
your old belt and sting two holes with the punch pliers and also at the and of your two elastic straps. Fix the belt and the elastic
straps together with the two studds.
own harness belt. It is just a simple example of my harness belt. If you find the perfect fit, then fix it with some pins. After doing
this, take the second elastic strap and do the same. Subsequent, you sew it together with the metallic ring. Afterwards you take
your old belt and sting two holes with the punch pliers and also at the and of your two elastic straps. Fix the belt and the elastic
straps together with the two studds.
FINISH!
Was du brauchst:
- Nadel und Faden
- zwei Gummibänder ( anstatt Gummibänder zu nutzen, kannst du auch alte Gürtels oder Stoffleder benutzen)
- einen alten Gürtel
- ein Metallring ( ich habe den Metallring von meiner alten Tasche raugeschnitten)
- Lochzange
- zwei Nieten
Was du machen musst:
Nehme eines der beiden Gummibänder und den Metallring. Passe es an deinem Körper an. Hier kannst du natürlich den Körpergürtel
individuell gestalten, so wie es dir lieb ist. Mein Gürtel dient nur so als Exemplar. Wenn du die richtige Passform gefunden hast, dann
nehme das Zweite Gummiband und gehe wie beim ersten Schritt vor. Befestige den Metallring und die Gummibänder mit Nadeln
zusammen. Nähe sie anschließend fest. Im Anschluss brauchst du deinen alten Gürtel und löcherst mit der Zange zwei Löcher rein,
sowie die Enden der beiden Gummibänder. Befestige den Gürtel und die Gummibänder mit zwei Nieten.
individuell gestalten, so wie es dir lieb ist. Mein Gürtel dient nur so als Exemplar. Wenn du die richtige Passform gefunden hast, dann
nehme das Zweite Gummiband und gehe wie beim ersten Schritt vor. Befestige den Metallring und die Gummibänder mit Nadeln
zusammen. Nähe sie anschließend fest. Im Anschluss brauchst du deinen alten Gürtel und löcherst mit der Zange zwei Löcher rein,
sowie die Enden der beiden Gummibänder. Befestige den Gürtel und die Gummibänder mit zwei Nieten.
FERTIG!
Keine Kommentare:
Kommentar veröffentlichen